Project EV EVD-20S-P User Manual page 6

2. Loosen the two screws at the bottom of the charging equipment that fixes the
mounting bracket. Keep them safe for later use. Bolt the mounting bracket onto the
wall using the fixings provided. Mount the holder using the same procedure.
3. After the mounting bracket and cable holder are fixed, place the charging
equipment onto the mounting bracket, with the outward curved part inserted onto
the slot on the rear side of the charging equipment. Lock the charging equipment
onto the bracket at the bottom using the two screws you removed earlier. The
installation process is then complete.
Hanging
Hole
6
Mounting
Hole
Cable
Holder
Mount the bracket and cable holder
Hanging
Hook
Fixed Charging Pile
Wall
Insert the hanging holes of the charging pile
into the hanging holes and install in place
Ground
Bracket
Wall
Ground
Charging Pile