Packaging List
Packaging List
Item
Mode Charging
Equipment
User Manual
Certificate of Quality
Mounting Bracket
Cable Holder
Hex Head expansion
bolt, M8*80/304
stainless steel
Installation and Wiring
Installation and Wiring
1. Firstly, according to regulation BS7671 18th Edition, the screen should be 1.2m-1.4m
from the ground. Ensure you isolate the supply in the distribution panel before
repairing or maintaining the charger.
According to the dimensions in the following drawings, drill 4 holes for bracket
mounting and 3 holes for holder mounting on the wall. Take out the expansion bolts
in the packing accessory bag, screw the expansion bolts into the holes. Remove the
nuts and washers for later use.
Quantity
1
1
1
Already installed on the rear side of
1
the charging equipment
1
7
Wall
Ground
Drill holes in the wall
Remark
Wall
Ground
5