Output Menu Structure - Klark Teknik DN9848 Operator's Manual

The Output Menu Structure
Each of the eight output channels provides configurable high and low-pass filters for setting the
crossover characteristics as well as six further stages of fully parametric equalisation that may be used
to compensate for system or enclosure characteristics. Delay of up to 300ms is available in addition to
gain control, muting and limiting. Dual all-pass phase correction with channel invert. A number of
preset input-to-output routing options are available.
The edit menu for any output channel may be accessed by pressing in the corresponding output menu
select button. Only one channel may be active for editing at any time, and after pushing the switch, the
Output menu will be accessed unless it has been password protected.
The menu is always first accessed at its top page where subsequent pushes on the select button will
cause the menu to step through the available pages. When all the pages have been presented, the next
push will return the user to the top of the menu. Pressing the HOME (SETUP), STORE or RECALL
keys will cause the display to jump to the HOME page. Pressing the select button for a different output
channel will show the same menu page for the newly selected channel.
Output channel
menu block:
20
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT