Rogramming Ettings; The Dn9848 Programming Panel; Navigating The Dn9848 Menus; Input And Output Menus - Klark Teknik DN9848 Operator's Manual

DN9848 Menu System
4. P
ROGRAMMING

4.1. The DN9848 Programming Panel

All the parameters for input and output signal processing and routing are defined via function specific
menu pages that are displayed and edited at the programming panel shown below. As described in
the illustration, each menu page uses a standard layout that relates the displayed parameters to the
three DATA ENTRY encoder knobs, which are used to adjust the parameter values.
DATA ENTRY
The encoder knobs adjust
the left, centre and right parameter values
at the display, in corresponding order. If
there are only one or two parameters, only
the active controls are lit.
When the menu page requires text entry, '<>'
indicates which knob moves the cursor left and
right while 'chr' indicates which knob changes the
alpha numeric character.
When there are sub-menu pages either the left of
right knob will be allocated to moving forward ( - - >)
or back up ( < - -). This will be indicated here by a
knob icon marked L (Left) or R (Right).

4.2. Navigating the DN9848 Menus

The DN9848 menu system is divided logically into Input, Output and Set Up menus, plus two function
specific menus for quick access to the Store and Recall commands. A menu map is provided at the
end of this section for reference purposes.
4.2.1

Input and Output Menus

Each of the four input channels (A-D) and eight output channels (1-8) has their own set of menu
pages, accessed and stepped through by pressing the channel's yellow MENU ACCESS button. When you
select a channel, its button lights to show that this channel is currently active at the programming
panel. In addition, all the menu pages show the channel number/letter in the top left-hand corner.
S
ETTINGS
The alpha numeric display,
showing the menu page for
programming PEQ1
Left knob
moves cursor
The icon indicates
that turning the left
knob will access the
sub-menu page.
6
The adjustable parameters are
named on the top line. Current
values are given below in
corresponding order.
Centre knob
changes
Right knob
character
inactive