Mount And Connect The Asa; Mount The Asa; Desktop Mount The Asa; Wall Mount The Asa - Cisco ASA 5506-X Hardware Installation Manual

Hide thumbs Also See for ASA 5506-X:

Table of Contents

Mount and Connect the ASA

This section describes positioning or mounting the ASA, and connecting its cords and cables. It contains the

following sections:

•

This section describes how to mount the ASA, and contains the following topics:

Do not remove the rubber feet included with the ASA because they are needed for proper cooling for all

Note

mounting orientations.

You can mount the ASA on a desktop by placing it on a desk in a horizontal position. Make sure there are no

blockages or obstructions within one inch of the top of the ASA or within .5 inch of the sides and back, so

that nothing interferes with cooling. Do not remove the rubber feet included with the ASA. They are also

needed for proper cooling.

Follow these steps to mount your ASA on a wall.

Step 1

Choose a location on the desired wall for the ASA.

Step 2

Use the two Cisco-provided screws and anchors.

Online Only

Mount the ASA, page 15

Connect Cables, Turn on Power, and Verify Connectivity, page 18

Connect to a Console Terminal or PC, page 19

C H A P T E R

Cisco ASA 5506-X Hardware Installation Guide

Table of Contents