Connections Between Cascading Modules And Mezz Nic Ports Of The Blade Server; Connections Between Cascading Module Ports And Blade Servers - H3C BT1004E Manual

Figure 2-6 Connections between cascading modules and Mezz NICs of the blade server
enclosure (2)
LOM P1
Embedded
Mezz1
Mezz2
Mezz3
Mezz4
Mezz5
Mezz6
Blade

2.5.2 Connections Between Cascading Modules and Mezz NIC Ports of the Blade Server

For connections between cascading modules and Mezz NIC ports, check through the
query tool.

2.5.3 Connections Between Cascading Module Ports and Blade Servers

Table 2-5 shows the connections between external ports of cascading modules and blade servers.
Table 2-5 Connections between external ports of cascading modules and blade servers
Model of Blade Server
Half-width single-height blade
server
Full-width single-height blade
server
LOM P2
Mid-plane
Maximum Number of
Supported Mezz NICs
3
6
3
1
1
2
3
4
5
6
Connections between external ports of
cascading modules and blade servers
See 2.5.3 1. Connections between external
ports of cascading modules and half-width
single height blade
For details, see
between external ports of cascading
modules and full-width single height blade
servers (supporting up to six Mezz
For details, see
2-8
2
OM
ICM
Networking
servers.
2.5.3 2. Connections
2.5.3 3. Connections
NICs).