Brother MFC-J4440DW Online User's Manual page 493

Hide thumbs Also See for MFC-J4440DW:

Table of Contents

Difficulties

Sent faxes are blank.

Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction

Related Information

If You Are Having Difficulty with Your Machine

Set Dial Tone Detection

Telephone Line Interference/VoIP

Related Topics:

Troubleshooting

Set Tone or Pulse Dialling Mode

Choose the Correct Receive Mode

Set Fax Detect

Set the Number of Rings Before the Machine Answers (Ring Delay)

Connect an External TAD

External TAD (Telephone Answering Device)

Set the Telephone Line Type

Print Reports

Clean the Scanner

Turn Off Memory Receive

Print a Fax Stored in the Machine's Memory

Cancel a Fax in Progress

Check and Cancel a Pending Fax

Load Documents in the Automatic Document Feeder (ADF)

Load Documents on the Scanner Glass

If you connect your machine to a PBX or ISDN line, set the menu setting of

Telephone Line Type to your telephone line type.

See Related Information: Set the Telephone Line Type.

If you often get transmission errors due to possible interference on the telephone

line or if you are using a VoIP system, try changing the Compatibility setting to

Basic (for VoIP).

See Related Information: Telephone Line Interference/VoIP.

Make sure you are loading the document correctly.

See Related Information: Load Documents in the Automatic Document Feeder

See Related Information: Load Documents on the Scanner Glass.

fluid on the glass strip. Clean the glass strip.

See Related Information: Clean the Scanner.