Before Using Your Machine - Brother MFC-J4440DW Online User's Manual

Hide thumbs Also See for MFC-J4440DW:

Table of Contents

Introduction to Your Machine

Before Using Your Machine

Before attempting any printing operation, confirm the following:

Make sure you have installed the correct software and drivers for your machine.

For USB or network cable users: Make sure the interface cable is physically secure.

Selecting the correct type of paper

For high quality printing, it is important to select the correct type of paper. Be sure to read the information about

acceptable paper before buying paper, and to determine the printable area depending on the settings in the

printer driver or in the application you use to print.

Simultaneous printing and faxing

Your machine can print from your computer while receiving a fax into memory. However, when the machine is

copying or receiving a fax on paper, it pauses the printing operation, and then continues printing when copying or

fax receiving has finished.

Firewall (Windows)

If your computer is protected by a firewall and you are unable to network print, network scan, or PC-FAX, you

may need to configure the firewall settings. If you are using the Windows Firewall and you installed the drivers

using the steps in the installer, the necessary firewall settings have been already set. If you are using any other

personal firewall software, see the User's Guide for your software or contact the software manufacturer.

Related Information

Introduction to Your Machine

> Before Using Your Machine