Configure Active Directory Authentication Using Web Based Management - Brother MFC-J4440DW Online User's Manual

Home > Security > Use Active Directory Authentication
Web Based Management
Configure Active Directory Authentication Using Web Based
Management
Related Models: MFC-J4440DW/MFC-J4540DW
Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine's settings is located on the back of the machine and marked
"Pwd".
4. Go to the navigation menu, and then click Administrator > User Restriction Function.
Start from , if the navigation menu is not shown on the left side of the screen.
5. Select Active Directory Authentication.
6. Click Submit.
7. Select the Active Directory Authentication menu.
8. Configure the following settings:
Option
Storage Fax RX Data
Remember User ID
Active Directory Server
Address
Active Directory Domain
Name
Protocol & Authentication
Method
Get User's Home Directory
LDAP Server Port
LDAP Search Root
9. Click Submit.
> Configure Active Directory Authentication Using
Description
Select this option to store incoming fax data. You can print all incoming fax
data after you log on to the machine.
Select this option to save your User ID.
Type the IP address or the server name (for example: ad.example.com) of
the Active Directory Server.
Type the Active Directory domain name.
Select the protocol and authentication method.
Select this option to obtain your home directory as the Scan to Network
destination. (available only for LDAP + kerberos authentication method)
Type the port number to connect the Active Directory server via LDAP
(available only for LDAP + kerberos authentication method).
Type the LDAP search root (available only for LDAP + kerberos
authentication method).
376