Mounting Range Hood On Wall - Faber LEVANTE II Installation Instructions Manual

MOUNTING RANGE HOOD ON WALL

1
DRAW POSITIONING LINES
Draw a vertical line from the supporting back wall to the ceiling or upper limit, at
H
the center of the area in which the hood will be installed.
Draw a horizontal line I from where the bottom edge of hood will be located, to
a minimum of 24" above an electric cooking surface and 30" above a gas cooking
surface.
I
= =
H
Min. 24" Min.30"
MIN. 24" OVER ELECTRIC/MIN. 30" OVER GAS
21