Ducted - 3 1/4" X 10" Rectangular Outlet On Top - Faber LEVANTE II Installation Instructions Manual

DUCTED - 3 1/4" X 10" RECTANGULAR OUTLET
ON TOP
Choose the rectangular upper air outlet or rectangular rear air outlet and cut where
1
indicated.(See page 18 for Rear Outlet)
Install the included rectangular air outlet with two screws
2
Connect the metal ductwork to the Roof or Wall Cap purchased separately and
3
then attach ductwork.
F
Torx Screwdriver
18
Top
Rear
Top
3 " x 10"
1/4
Caution: If an elbow is required,
do it as far away from the
hood's exhaust opening as
possible.
.
F