Non Ducted Recirculation Option - Faber LEVANTE II Installation Instructions Manual

NON DUCTED RECIRCULATION OPTION

a
Required Activated Charcoal
Filter Accessory - (FILTER5)
purchased separately.
Non Ducted installations only:
1. Remove the two screws located on the motor
housing in the location indicated.
the blower housing in the location indicated on
c
. The front side of the FILTER5 will
have the keyhole mounting on the top surface
through the grills.
3. Use the two screws removed earlier to attach
the FILTER5 in place.
NOTE: For Non ducted installations the Canadian
Grid should NOT be used.
d
Remove the indicated blower cover
(do not discard the screw).
b3
with the same screw.
c
Reinstall the existing Grease Filters
after installing the Activated Charcoal
Filter before operating hood.
Cut the
b1
cover
where
indicated in
picture b1.
b2
Recycle
upper
pieces of
blower
cover.
Go to page 20
15