Using The Boost Mode - Elko EKO09765 User Manual

Smart Radiator Thermostat
When the current temperature is higher than setpoint
When the setpoint is higher than current temperature

Using the boost mode

DUG_ITRV_ELKO-00
When the current temperature value is equal to or higher than the setpoint, the
flame icon on the control panel page will be displayed in grey state (A).
Radiator Thermostats
A
19
When the setpoint (max 30 °C) is higher than the current temperature value, the
flame icon on the control panel page will be displayed in highlighted state (A).
Radiator Thermostats
A
30
Using the boost mode, the setpoint is increased by 2 ºC from the current room
temperature.
To use the boost mode:
1. On the Home page, tap All devices > Radiator Thermostat.
2. On the device control panel page, select the
3. In the slide-up menu, select the Boost Duration (A) and tap Confirm.
NOTE:
• The boost duration is set to 1 hour by default.
• The sliding bar can be used during the boost mode.
• The boost mode will stop automatically when the boost duration is
completed.
• If the current temperature is 28.5 ºC - 29.5 ºC, then the boost mode will
set the temperature to the maximum (30 ºC) temperature.
.
17