ECOVACS DEEBOT T20 OMNI Instruction Manual page 33

No. Malfunction
After returning to the Station,
11 DEEBOT does not empty the
Dust Bin.
12 Fail to empty the Dust Bin.
Possible Causes
Dust Collection Cabin is not closed.
Dust Bag is not installed in the Station.
Manually moving DEEBOT back to the Station
might not trigger Auto-Empty function.
In Do Not Disturb mode, DEEBOT will not empty
the dust after returning back to the Station.
The OMNI Station prompts the Dust Bag is
full.
If the above possible causes have been ruled out,
components of the Station may be abnormal.
The OMNI Station prompts the Dust Bag is
full.
The outlet of Dust Bin is blocked by foreign
objects.
Solutions
Please close the Dust Collection Cabin.
Install the Dust Bag, and close the Dust Collection Cabin.
It is recommended to let DEEBOT return to the Station on its
own. Please do not manually move it.
Cancel Do Not Disturb mode in ECOVACS HOME App or
manually start dust empty.
Replace the Dust Bag according to the [Maintenance]
section and close the Dust Collection Cabin. If the Dust Bag
is not full when prompted by ECOVACS HOME App, you can
put it back again.
Please contact Customer Care for help.
Replace the Dust Bag according to the [Maintenance]
section and close the Dust Collection Cabin. If the Dust Bag
is not full when prompted by App, you can put it back again.
Remove the Dust Bin and clean the foreign objects on the
outlet.
33 EN