ECOVACS DEEBOT T20 OMNI Instruction Manual page 20

Operating DEEBOT
When creating a map for the first time, please follow DEEBOT to help eliminate some minor issues.
For example, DEEBOT may get stuck under the furniture. Please refer to the following solutions:
1. Raise the low sitting furniture if possible; 2. Cover the bottom of the furniture; 3. Set up Virtual Boundary via the App.
1
Start
Tap on DEEBOT or on the OMNI Station to start.
Note: For the rst-time cleaning, please ensure that DEEBOT is fully charged.
2
Pause/Wake Up
Tap on DEEBOT or on the OMNI Station to pause.
Note:
The indicator light will go out after the robot is paused for a few minutes.
Press the AUTO Mode Button on DEEBOT to wake up the robot.
EN 20
3
Back to Station
Tap for 3 seconds to recall DEEBOT to the OMNI Station.
Note: When DEEBOT is not working, it is recommended to keep it switched ON
and charging.