Safety Warnings - Energizer EZ40VTDE46N Manual

SAFETY WARNINGS

Safe operating practices for lawnmowers
Training
a) Read the instructions carefully. Be familiar with the controls and the correct use of the machine.
b) Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict
the age of the operator.
c) Never operate the machine while people, especially children, or pets are nearby.
d) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their
property.
Preparation
a) While operating the machine always wear substantial footwear and long trousers. Do not operate the machine when
barefoot or wearing open sandals. Avoid wearing clothing that is loose fitting or that has hanging cords or ties.
b) Thoroughly inspect the area where the machine is to be used and remove all objects which can be thrown by the
machine.
c) Before using, always visually inspect to see that the blade, blade bolt and the blade assembly are not worn or
damaged. Replace worn or damaged components in sets to preserve balance. Replace damaged or unreadable labels.
Operation
a) Operate the machine only in daylight or in good artificial light.
b) Avoid operating the machine in wet grass.
c) Always be sure of your footing on slopes.
d) Walk, never run.
e) Mow across the face of slopes, never up and down.
f) Exercise extreme caution when changing direction on slopes.
g) Do not mow excessively steep slopes.
h) Use extreme caution when reversing or pulling the machine towards you.
i) Stop the blade(s) if the machine has to be tilted for transportation when crossing surfaces other than grass, and when
transporting the machine to and from the area to be used.
j) Never operate the machine with defective guards or shields, or without safety devices, for example deflectors and/or
grass collector, in place.
k) Switch on the motor carefully according to instructions and with feet well away from the blade(s).
l) Do not tilt the machine when switching on the motor, except if the machine has to be tilted for starting. In this case, do
not tilt it more than absolutely necessary and lift only the part, which is away from the operator.
m) Do not start the machine when standing in front of the discharge opening.
n) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
o) Do not transport the machine while the power source is running.
p) Stop the machine, and remove the battery. Make sure that all moving parts have come to a complete stop:
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine,
- after striking a foreign object.
Inspect the machine for damage and make repairs before restarting and operating the machine;
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE