Table of Contents
Advertisement
• Lift the grass catcher bag by its handle to remove from mower.
• Empty grass clippings.
• Lift the rear discharge cover and reinstall the grass catcher bag as described earlier in this manual.
CARE AND MAINTENANCE
REPLACING THE CUTTING BLADE
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with rags or other
materials when performing any maintenance on the blades. ALWAYS remove the battery when servicing or
transporting the mower.
REMOVE BATTERY
While wearing leather padded gloves, wedge a block of wood between the blade and the mower deck in order to
prevent the blade from turning when the bolt (1) is being removed.
• Using an adjustable wrench or 27 mm socket, loosen the bolt (1) and remove the blade (2). Turn the bolt
"COUNTERCLOCK WISE "to loosen it and "CLOCKWISE" to tighten it.
• Remove the bolt (1) and the blade (2).
• To re-install the blade, position the blade with the cutting edges toward the ground. Assemble the bolt as shown.
Using a 27 mm socket or wrench, turn the blade nut "CLOCKWISE" in order to secure the blade.
NOTE: Be sure to replace the parts in the exact order in which they were removed. When installing the cutting blade,
verify that it is installed with the curved ends pointing toward the mower deck, and not toward the ground.
Advertisement
Table of Contents
