Installing Side Discharge Chute; To Install Battery Pack; To Remove Battery Pack - Energizer EZ40VTDE46N Manual

• The mulching plug must be re-installed when the grass catcher bag is removed.
NOTE: When mulching, do not install either the side discharge deflector or the grass catcher bag.

INSTALLING SIDE DISCHARGE CHUTE

• Lift the side discharge cover (1).
• Align the grooves (2) on the discharge chute (3) with the
pins (4) on the underside
of the discharge cover (1).
• Lower the discharge chute until the hooks on the mower
deck are secured in the openings in the discharge chute.
• Release the side discharge cover.
NOTE: When using side discharge, do not install the
grass catcher bag. Ensure the mulch plug is installed.

TO INSTALL BATTERY PACK

• Lift and hold up the battery door.
• Align the battery with the mower battery port.
• Make sure the battery release button snaps in place and that battery is fully seated and secure in the mower before
beginning operation.
• If the machine is not going to be used immediately, remove the battery.

TO REMOVE BATTERY PACK

• Release the bail lever to stop the mower.
• Press the battery release button (3) on the mower. Open the battery door.
• Remove battery from the mower.