Advertisement
Operation and Controls
TA-36
Front Panel
1.
Input:
Connect input cable to this port.
2.
Output:
Connect this port to the distribution system.
3.
FM Trap:
This switch provides –20dB FM attenuation from 88 to 96 MHz.
4.
FM Trap:
This switch provides –20dB FM attenuation from 95 to 108 MHz.
5.
HI Gain:
This control allows adjustment of VHF high band output level.
6.
LO Gain:
This control allows adjustment of VHF low band output level.
7.
-20 dB Test Point:
Connect a test device at this port to monitor output signal.
8.
Power Light:
This LED indicates power is on when lit.
9.
Power Cord:
This three prong polarized power cord is approved connects to 108 to 125Vac, 50/60Hz electrical outlet. Do not cut the ground terminal.
10. Fuse:
Replace with a 0.5A, 250V fuse.
6
Ph: 800-421-6511
Rev. 04/13
www.picodigital.com
Advertisement
