Operations and Controls
CA-30/1000
Front Panel Controls and Specifications
1.
Gain Adjust:
Potentiometer provides for R.F. gain adjustment.
2.
Tilt Adjust:
Potentiometer provides for slope adjustment over entire bandwidth.
3.
IN:
The input RF signal is connected to this port.
4.
OUT:
The amplified RF signal is available at this port.
5.
-20 dB Input Test Monitor:
Input test point is provided to monitor input level to the amplifier.
6.
-20 dB Output Test Monitor:
Output test point is provided for amplifier set up and monitoring.
7.
Power cable:
The three-prong type power plug connects to a 117 VAC, 60 Hz electrical outlet.
Ph:800-421-6511
6
Rev. 02/13
www.picodigital.com