Table of Contents
Advertisement
L860 Manual.qxd
12/2/05
2:21 PM
1.
Power:
Indicates power is on when lit.
2.
R.F.:
Potentiometer provides for R.F. level adjustment
3.
Tilt:
Potentiometer provides for slope adjustment over entire
bandwidth.
4.
Input Test –20dB:
A -20 dB test point is provided for monitoring input signal.
5.
Output Test:
A -20 dB test point is provided for monitoring output signal.
Page 5
Connections and Controls
Ph: 800-421-6511
L860
6.
RF Out:
The amplified signal is directly available at this port.
7.
Output Attenuator:
Additional attenuator or tilt may be inserted here.
8.
Input:
Connect the input signal to this port.
9.
Power Connection:
Connect a three-prong power cord to this receptacle.
www.picomacom.com
5
Rev. 12/05
Advertisement
Table of Contents
