PIDA-1000 Manual.qxd
6/29/04
Operation and Controls
PIDA-1000
Front Panel Control
1. FWD Output (Rev Input):
The amplified 49-550MHz RF signal is available at this port. This port is
also the input for 5-36MHz RF signal
2. FWD Slope:
Adjustment potentiometer provides for slope adjustment over 49-550MHz
bandwidth.
3. FWD Gain:
Adjustment potentiometer provides for overall amplifier gain level adjust-
ment over 49-550MHz bandwidth.
4. FWD Input (Rev Output):
The input 49-550MHz RF signal is connected to this port. The amplified
5-36MHz RF signal is available at this port.
6
Ph: 800-421-6511
Rev. 06/03
11:09 AM
Page 6
www.picomacom.com
5. -30 dB Output Test Monitor:
Output test point is provided for amplifier set up and monitoring.
6. REV Gain:
Adjustment potentiometer provides for overall amplifier gain level adjust-
ment over 5-36MHz bandwidth.
7. -30 dB Input Test Monitor:
Input test point is provided to monitor input level to the amplifier.
8. Power indicator LED:
This LED will remain illuminated while the unit is supplied a 26VAC
source.
Power Adaptor Hook-Up