Post-Crash Alert System; Transporting The Vehicle - Ford Expedition 2018 Owner's Manual

Hide thumbs Also See for Expedition 2018:
Table of Contents

Advertisement

4
2
E142665
1.
Remove the negative (-) jumper cable
from the disabled vehicle.
2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle battery.
3. Remove the jumper cable from the
positive (+) terminal of the booster
vehicle battery.
4. Remove the jumper cable from the
positive (+) terminal of the disabled
vehicle battery.
5. Allow the engine to idle for at least one
minute.
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201708, Third-Printing-
Roadside Emergencies
1
3
304

POST-CRASH ALERT SYSTEM

The system flashes the direction indicators
and sounds the horn (intermittently) in the
event of a serious impact that deploys an
airbag (front, side, side curtain or Safety
Canopy) or the seatbelt pretensioners.
The horn and indicators turn off when:
You press the hazard control button.
You press the panic button on the
remote entry transmitter (if equipped).
Your vehicle runs out of power.
Sounding of the horn is only enabled
in specific markets.

TRANSPORTING THE VEHICLE

E143886

Advertisement

Table of Contents
loading

Table of Contents