Table of Contents
Advertisement
Crash and Breakdown Information
5. Unlock the driver door. See Unlocking
and Locking the Doors Using the
Remote Control (page 76).
JUMP STARTING THE VEHICLE
To Start Your Vehicle
1.
Run the engine of the booster vehicle
at a moderately high speed.
2. Move the transmission selector lever
of the low charge vehicle to park (P).
3. Switch on the ready to drive mode. See
Starting the Vehicle (page 155).
4. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.
Note: Do not switch the headlamps on
when disconnecting the cables. The peak
voltage could damage the bulbs.
Disconnect the cables in the reverse order.
POST-CRASH ALERT SYSTEM
WHAT IS THE POST-CRASH
ALERT SYSTEM
The system helps draw attention to your
vehicle in the event of a serious impact.
HOW DOES THE POST-CRASH
ALERT SYSTEM WORK
The system is designed to turn the hazard
flashers on and to intermittently sound the
horn in the event of a serious impact that
deploys an airbag or the seatbelt
pretensioners.
2022 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
POST-CRASH ALERT SYSTEM
LIMITATIONS
Depending on applicable laws in the
country your vehicle was built for, the horn
does not sound in the event of a serious
impact.
SWITCHING THE POST-CRASH
ALERT SYSTEM OFF
Press the hazard flasher switch or the
unlock button on the remote control to
switch the system off.
Note: The alert turns off when the vehicle
battery runs out of charge.
POST IMPACT BRAKING
HOW DOES POST IMPACT
BRAKING WORK
In the event of a moderate to severe crash,
the braking system reduces the vehicle's
speed in order to prevent or reduce the
impact of a potential secondary crash.
POST IMPACT BRAKING
LIMITATIONS
Post impact braking does not activate if
any of the following occur:
•
The anti-lock braking system is
damaged during the collision.
•
Electronic stability control is disabled.
OVERRIDING POST IMPACT
BRAKING
You can override post impact braking by
pressing the brake or accelerator pedal.
289
Advertisement
Table of Contents
Troubleshooting
