Table of Contents
Advertisement
Note: The rate of charge, or charging power,
is controlled by the device. During charging,
the device and the charger may heat up, this
is normal. If the battery gets hotter than
usual, the charger may stop charging.
E250812
Message
Wireless Charger Active
Charging Terminated
Phone misaligned or object
between phone and charger
detected. Correct the condi-
tion to resume charging.
FCC ID: L2C0066T
This equipment has been tested and found
to comply with part 18 of the FCC Rules.
•
This equipment generates, uses and
can radiate radio frequency energy and
may cause harmful interference to
radio communications. There is no
guarantee that the interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, please consult the dealer.
•
This product is not end-user
serviceable.
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201708, Third-Printing-
Auxiliary Power Points
Behavior
Message on screen display
or pop-up window.
Pop-up window.
172
The charging area is on the center console
or lower instrument panel. See Center
Console (page 174).
You can charge a device if the vehicle is off
when in accessory mode or if SYNC is on.
To begin charging, place the device on the
center of the charging surface with the
charging side down. The charging stops
after your device reaches a full charge.
Note: If the system detects a foreign object
or if the device is misaligned on the charging
area, a message appears in the display.
This message appears when
wireless charging begins.
The system stops charging
your device if the system
detects the phone is
misaligned, or a foreign
metal object is on the char-
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two
conditions:
•
This device may not cause interference,
and
•
This device must accept any
interference, including interference that
may cause undesired operation of the
device.
Description
ging surface.
Advertisement
Table of Contents
Troubleshooting
