Table of Contents
Advertisement
Switching Adaptive Cruise Control
On
Press ON.
The indicator, current gap setting
and set speed appear in the
E144529
information display.
E183738
Setting the Adaptive Cruise Speed
Note: When adaptive cruise control is
active, the speedometer may vary slightly
from the set speed displayed in the
information display.
1.
Drive to desired speed.
2. Press SET-.
3. A green indicator light, the current gap
setting and your set speed appear in
the information display.
4. Take your foot off the accelerator
pedal.
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201708, Third-Printing-
Cruise Control
E183738
5. A vehicle image illuminates if the
system detects a vehicle in front of you.
Setting the Adaptive Cruise Speed
When Your Vehicle is Stationary
1.
Follow a vehicle to a complete stop.
2. Keep the brake pedal fully pressed.
3. Press RES+.
4. The set speed adjusts to 20 mph
(30 km/h).
5. A green indicator light, the current gap
setting and your set speed appear in
the information display.
Following a Vehicle
vehicle, your vehicle does not always
decelerate quickly enough to avoid a
crash without driver intervention. Always
apply the brakes when necessary. Failing
to do so may result in a crash, serious
injury or death.
only warns of vehicles detected by the
radar sensor. In some cases there may
be no warning or a delayed warning. You
should always apply the brakes when
necessary. Failure to do so may result in
a crash, serious injury or death.
239
WARNING: When following a
WARNING: Adaptive cruise control
Advertisement
Table of Contents
Troubleshooting
