BMW X5 2023 Owner's Manual page 369

Warning
Additives are harmful and incorrect additives
can damage the engine. There is a risk of
injury and risk of damage to property. Do not
allow additives to come into contact with skin,
eyes or articles of clothing. Use suitable addi-
tives only.
Coolant level
General information
The coolant may be overfilled in the coolant
reservoir when the vehicle is delivered from the
factory. Run longer to achieve the normal cool-
ant level.
The nominal coolant level is indicated by the
maximum mark in the filler neck of the coolant
reservoir.
Additional information:
For an overview, refer to page 361.
Checking the coolant level
1. Let the engine cool down.
2. Opening the hood.
Opening, refer to page 363.
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres-
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
Online Edition for Part no. 01405A7D5F9 - II/23
Operating materials
5. The coolant level is correct when it is just
below the maximum mark in the filler neck.
6. Close the lid.
Adding coolant
1. Let the engine cool down.
2. Opening the hood.
Opening, refer to page 363.
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres-
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
5. If the coolant is low, slowly add coolant up
to the specified fill level; do not overfill.
6. Close the lid.
7. Have the cause of the coolant loss elimi-
nated as soon as possible.
Disposal
Comply with the relevant environmen-
tal protection regulations when dispos-
ing of coolant and coolant additives.
Washer fluid
General information
All spray nozzles are supplied from one tank.
Use a mixture of tap water and windshield
washer concentrate. If desired, a windshield
washer concentrate containing antifreeze can
be used.
MOBILITY
369