BMW X5 2023 Owner's Manual page 164

CONTROLS
ing the vehicle in order to illuminate the area
surrounding the vehicle.
Switching pathway lighting on
▷ After switching off the drive-ready state,
briefly push the turn signal lever forward.
▷ Press and hold the button on the
vehicle key for approx. 1 second.
Setting the duration
1. Apps menu
2. "Vehicle apps"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. "Pathway lighting"
6. Select the desired setting.
Daytime driving lights
General information
The daytime driving lights illuminate when
drive-ready state is switched on.
Activating/deactivating daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti-
vate the daytime driving lights in front.
1. Apps menu
2. "Vehicle apps"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. Depending on vehicle equipment or na-
tional-market version:
▷ "Daytime driving lights"
▷ "Rear daytime driving lights"
▷ "BMW Iconic Glow"
164
Lights
Online Edition for Part no. 01405A7D5F9 - II/23
Adaptive lighting functions
Principle
Adaptive lighting functions enable dynamic il-
lumination of the road.
General information
The adaptive lighting functions may consist of
one system or multiple systems, depending on
the equipment version:
▷ Cornering light.
Activating the adaptive lighting
functions
Press the button on the light switch.
The LED in the button illuminates.
The adaptive lighting functions are active
when the drive-ready state is switched on.
Cornering light
Principle
In tight curves, for instance on mountainous
roads or when turning, an additional cornering
light is switched on that illuminates the inside
of the curve when the vehicle is moving below
a certain speed.
General information
The cornering light is automatically switched
on depending on the steering-wheel angle or,
where applicable, the use of turn signals.
When driving in reverse, the cornering lights
may be automatically switched on regardless
of the steering-wheel angle.