BMW X5 2023 Owner's Manual page 242

CONTROLS
To exit rearview camera view, select an-
other camera view in the selection window
or press the button again.
Deactivated rearview camera
When the rearview camera is deactivated, for
instance when the trunk is open, the camera
image is displayed with gray shading.
Semi-automatic camera
perspective
Principle
Depending on the parking direction and en-
gaged selector lever position, a fixed camera
perspective is displayed with the areas in front
of or behind the vehicle.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Turning the semi-automatic camera
perspective on/off
1. Press the button.
2. Select the icon in the selection window.
To exit the fixed camera view, select an-
other camera view in the selection window.
Automatic camera
perspective
Principle
The automatic camera perspective shows a
steering-dependent view in the respective driv-
ing direction.
This perspective adapts to the respective driv-
ing situation.
242
Parking
Online Edition for Part no. 01405A7D5F9 - II/23
General information
As soon as obstacles are detected, the view
changes to a fixed display of the area in
front of or behind the bumper or, if necessary,
changes to side protection.
When reverse gear is engaged, the automatic
camera perspective is, if necessary, exited and
the system uses a semi-automatic camera
perspective to the rear. If necessary, select the
automatic camera perspective when reverse
gear is engaged. The automatic camera per-
spective will then be maintained for the current
parking operation.
Follow the information in the "Parking assis-
tance systems" chapter.
Turning the automatic camera
perspective on/off
Turning the camera view on/off
automatically
When the parking assistance systems' display
is turned on, automatic camera perspective is
selected automatically.
The icon in the selection window is selected
automatically.
To exit the steering-dependent camera view,
select another camera view in the selection
window.
Turning the camera view on/off
manually
1. Press the button.
2. The icon in the selection window is se-
lected automatically.
To exit the steering-dependent camera
view, select another camera view in the se-
lection window or press the button again.