Download Print this page
Tektronix AVDC100 Reference
Tektronix AVDC100 Reference

Tektronix AVDC100 Reference

Audio/video delay corrector

Advertisement

Quick Links

Status LEDs
LED
ENCODE mode
VIDEO
Off
No video signal
Green
Video + SDI locked
Yellow
Video + SDI unlocked
Red
(Not used)
AUDIO
Off
No AES signal
Green
Audio OK
Yellow
Low audio envelope
Red
Low audio or no audio
DATA
Green
Not used, LED forced off
Yellow
in Encode mode
Red
A/V DELAY
Green
Not used, LED forced off
Yellow
in Encode mode
Red
Sample Display Readouts
ENCODE
WM
=
W1
ID:
TEKSTUDIO
DECODE
AV
-1
Flds
D-1
ID: TEKSTUDIO
Alternate messages for A/V delay display:
?loAud = Low audio volume
?loCor = Low audio correlation
?loEnv = Low audio envelope variation
?noDat = No audio watermark data
?noWM = Recovering from no watermark
?nSync = No watermark sync pattern
?stall = Recovering from A/V
measurement stall
?wait = Waiting for data
?wrAud = Recovering from wrong audio
AV Stalled = Excessive loCor, loEnv,
or noDat condition
No Watermark = Excessive nSync
Wrong Audio? = Excessive loCor
BYPASS
Bypass
Mode
v1.0
03/28/01
www.tektronix.com
DECODE mode
BYPASS mode
No video signal
No video signal
Video + SDI locked
Video + SDI locked
Video + SDI unlocked
Video + SDI unlocked
(Not used)
(Not used)
No AES signal
No AES signal
Audio OK
Audio OK
Low audio envelope
Low audio envelope
Low audio or no audio
Low audio or no audio
Data OK
Not used, LED forced off
WM sync adjustment
in Bypass mode
No WM sync detected
A/V value updated
Not used, LED forced off
A/V value not updated
in Bypass mode
Persistent A/V problem
WM = Watermark intensity level (1 – 3)
ACTIVE
ACTIVE or PASSIVE
Watermark insertion active or inactive
ID = Source ID
AV = Audio/video measurement
n 1
Note: When the A/V delay measurement
number (in fields) equals the dynamic or
fixed delay number, the A/V delay is
properly compensated.
+30 to –150 = A/V delay in video fields
Positive number = uncorrectable delay
D or F
D = Dynamic Delay (0 – 120)
F = Fixed Delay (0 – 150)
n = Watermark gain meter
0 – 9 or E
0 – 9 = Relative number of correctable
errors detected in audio data
E = Too many errors to correct in audio
data
Software version, date, and time
16:28
Reference
AVDC100
Audio/Video Delay Corrector
071-0874-00
This document applies to firmware
version 1.0.
*P071087400*
071087400

Advertisement

loading

Summary of Contents for Tektronix AVDC100

  • Page 1 Low audio or no audio Low audio or no audio DATA Green Not used, LED forced off Data OK Not used, LED forced off AVDC100 Yellow in Encode mode WM sync adjustment in Bypass mode No WM sync detected Audio/Video Delay Corrector...
  • Page 2 Press ¿ to start (Reboot opens the 4) UPDATE FIRMWARE (Performs firmware update, reboots instrument) Press ¿ to reboot 5) REBOOT (Exits boot menu by rebooting instrument) Boot menu) ã 2001 Tektronix, Inc. All rights reserved. AVDC100 Audio/Video Delay Corrector Reference...

This manual is also suitable for:

071-0874-00