Setting Up The Glassware; Glassware Assembly; Connecting To The Megger Kf-Lab - Megger KF-LAB Mk II User Manual

3.3 Setting Up the Glassware

3.3.1 Glassware Assembly

3.3.2 Connecting to the Megger-KF LAB Moisture Meter
(1) Position the titration vessel on the Titrator.
(2) Position the electrodes on the
titration vessel and tighten by
hand.
Note: The glass joints do not require PTFE
sleeves or grease. The special screw fittings
seal the vessel from the atmosphere and are
easily released, even after several weeks.
Megger KF-LAB
Mk II
10