Page 1
TTR 330 Quick Start Guide 1) Connect Leads / Power / Ground Before After To Ground Source To High Voltage Primary Winding To Low Voltage Secondary/Tertiary Winding Example Using 1:1 Self Test: 2) Turn Instrument On Revised 6/18/2014 Page 1...
Page 2
TTR 330 Quick Start Guide 3) Wait for the Menu to Display. Click the large button to Launch (Legacy TTR will automatically launch PowerDB) 4) Fill out the form (this is form 3PH TTR WITH TAP CHANGER - 56365) REQUIRED...
Page 3
TTR 330 Quick Start Guide 5) Left Click/Hit Enter on to View/Change Settings LEFT CLICK/HIT ENTER ON EITHER TO SAVE 6) Run the Test LEFT CLICK TO START (OR ARROW TO ROW AND HIT VALUES FILLED IN FROM STEP 4 RECOMMENDED...
Page 4
TTR 330 Quick Start Guide 7) Finish the Test LEFT CLICK/HIT ENTER ON TO TEST NEXT TAP (DESCENDING ORDER) LEFT CLICK/HIT ENTER ON TO FINISH Revised 6/18/2014 Page 4...
Page 5
TTR 330 Quick Start Guide 8) Save Results LEFT CLICK/HIT ENTER TO SAVE Type in File Name Here Once file is saved, file will automatically save after each test (without prompt) Revised 6/18/2014 Page 5...
Need help?
Do you have a question about the TTR 330 and is the answer not in the manual?
Questions and answers