Download Print this page

Toro 07419 Installation Instructions Manual page 10

Heavy-duty workman vehicles rear pto kit

Advertisement

Mobile PTO Operation
Important:
When operating the PTO, the machine
must not be moving when PTO is started.
1.
Engage the parking brake.
2.
Shift the transmission into the N
3.
Fully depress the clutch pedal and start the
engine.
Note:
The engine will not crank unless the PTO
lever is in the O
FF
4.
Shift the PTO lever as follows:
Important:
Do not engage or disengage
PTO while moving otherwise damage to the
PTO will occur. Always stop vehicle before
shifting PTO.
For machines with serial numbers
239999999 and before, move PTO lever
fully forward to the E
For machines with serial numbers
240000000 and after, move PTO lever fully
rearward to the E
5.
Shift the transmission into the desired gear.
6.
Disengage the parking brake.
7.
Slowly release the clutch pedal.
To stop the PTO operation, fully depress the clutch
pedal and move PTO lever to the D
Note:
You may stop the PTO momentarily by fully
depressing the clutch pedal and allowing machine to
come to a complete stop.
position.
EUTRAL
position.
position.
NGAGE
position.
NGAGE
position.
ISENGAGE
Stationary PTO Operation
Important:
When operating the PTO, the machine
must not be moving when PTO is started.
1.
Engage the parking brake.
2.
Shift the transmission into the N
3.
Fully depress the clutch pedal and start the
engine.
Note:
The engine will not crank unless the PTO
lever is in the Disengage position.
4.
Shift the PTO lever as follows:
Important:
Do not engage or disengage
PTO while moving otherwise damage to the
PTO will occur. Always stop vehicle before
shifting PTO.
For machines with serial numbers
239999999 and before, move PTO lever
fully forward to the E
For machines with serial numbers
240000000 and after, move PTO lever fully
rearward to the E
5.
Slowly release the clutch pedal.
To stop the PTO operation, fully depress clutch pedal
and shift PTO lever to the D
Note:
You may stop the PTO momentarily by fully
depressing the clutch pedal and allowing transaxle
and PTO to come to a complete stop.
10
position.
EUTRAL
position.
NGAGE
position.
NGAGE
position.
ISENGAGE

Advertisement

loading