Table of Contents
Advertisement
10.4.Close Time Setting
1) Press "1", "+" or "-" key to "Close" setting.
"2"
2) Press the
the Close On or OFF function, after choosing ON, press the "+" or "-"
key to set the close time, the time setting range: 001Min ~ 240Mins.
3) Press "2" to save, press "3" to return to the main interface.
10.5.Display Setting
1) Press "1", "+" or "-" key to select "Display" interface.
"2"
2) Press
key to enter the display interface, press "1" key to select
Numbers or Curves.
3) Press "2" to save, press "3" to return to the main interface.
Note: Red curve indicates temperature control mode, and blue is
power control mode.
10.6.Temperature Limit Alarm Setting
1) Press "1", "+" or "-" key to select "Alarm temp+" setting.
"2"
2) Press
to enter the upper and lower alarm limit setting interface,
press key "1" to select ON to start the temperature alarm function or
OFF not to alarm, and press "+" or "-" to set the alarm temperature. The
key to enter the close setting interface, press "1" to select
10
Advertisement
Table of Contents
