Z Height; Heat Time - VECTECH ET9181 Instruction Manual

Z Height

5.2.5
Z Height is the distance that the Z axis moves down from home position.
1) In Setup menu, press "+" or "-" key to move the cursor to Z Height.
2) Press "SET" key to activate value (Blue indicates value can be modified).
3) Press "+"or "-" key to adjust height, the height range is 0～50mm.
4) Press "SET" key to save.
5) Press "ECS" key to back to Main menu.

Heat Time

5.2.6
Heat Time is the amount of time that the tip waits before soldering
process.
1) In Setup menu, press "+" or "-" key to move the cursor to Heat Time.
2) Press "SET" key to activate value (Blue indicates value can be modified).
3) Press "+"or "-" key to adjust time, the time range is 0～10s.
4) Press "SET" key to save.
5) Press "ECS" key to back to Main menu.
19