Siemens LDS 6 Operating Instructions Manual page 46

In-situ laser gas analyzer

Hide thumbs Also See for LDS 6:

Table of Contents

Appendix

A.2 Tool kits

Sensor Alignment Kit

The Sensor Alignment Kit (shown below) is used for installation and re-alignment of the

sensors. The kit includes five tools, described in the table below, and an instruction for

alignment of the sensors. The instruction is found on the inside of the case.

1. Hook spanner

2. Allen keys, 3 mm and 6 mm

3. Alignment flange

4. Light source

5. Lubricant, copper based

Figure A-4

Blue line

CD 6C alignment kit

Sensor CD 6C Operating Instructions

Operating Instructions, 12/2007, A5E00912721-02

Table of Contents