Siemens LDS 6 Operating Instructions Manual page 24

In-situ laser gas analyzer

Hide thumbs Also See for LDS 6:

Table of Contents

Installation Guidelines

3.3 Alignment

Move the flashlight from the receiver to the transmitter side. At the receiver side, mount the

corresponding adapter (with a blue line) and the cross hair.

Receiver side

Figure 3-15

Again, adjust the four alignment screws until the light dot is centered in the cross hair at the

receiver side.

Receiver side

Figure 3-16

Mount of linearization adapter at receiver side

All four adjustment screws are used to align the sensor at the receiver side

Sensor CD 6C Operating Instructions

Operating Instructions, 12/2007, A5E00912721-02

Table of Contents