Resetting A Device's Wireless Settings; Amazon Alexa And Google Assistant - Kidde P4010ACSCOAQ-WF-CA User Manual

11.3 Resetting a Device's Wireless Settings

If you encounter an issue at any point during the Wi-Fi enrollment process, you may reset the device by following the
directions below. noTe: wi-Fi features do not function without AC power.
A. Begin reset
• Press and hold the button on the device for 8-9 seconds until you hear 3
beeps. Release button. You will hear the words "Resetting wireless settings."
B. Conclude reset
Light ring will flash green once and then it will pulse red. You will hear the
words, "Ready to connect, follow quick start instructions."
• Device has been reset.
• See Section 11.1 to begin Wi-Fi enrollment, or Section 11.2 for adding this
device to an existing Wi-Fi alarm network.
noTe: If no further steps are taken within 15 minutes of resetting the unit's wireless settings, a voice
prompt "Not Connected" will be heard once, and the Wi-Fi function will turn off. The unit will then
perform as a standard hardwired alarm. See Section 11.2 for adding this device to an existing alarm
network.

11.4 Amazon Alexa and Google Assistant

Your WiFi alarm is compatible with Amazon Alexa and Google Assistant. Follow instructions in the
Kidde app help section to link your WiFi alarm to Amazon Alexa and/or Google Assistant.*
* AMAZON and ALEXA are trademarks of Amazon Technologies, Inc. or its affiliates.
Google and Google Assistant are trademarks of Google LLC.
22
"Resetting
wireless
settings."
Figure 11.3-A
Figure 11.3-B
TM
Hold for
8-9 seconds
"Ready to
connect, follow
Quick Start
instructions."