Gaggenau AH 320-701 Operating And Installation Instructions page 18

Installation
1
Lateral duct
Bracket
Fig. . . . . 20 Fig Fig 20 20
Fig Fig 20 20
16
The lateral outlet is installed after
installation of the wall hood.
Proceed as follows:
17. Place the flexible DN 150 (6") 17. 17.
17. 17.
pipe through the recess in the
top duct.
18. 18.
18. Now secure the brackets 18. 18.
included with the lateral duct,
2
either
- under the ceiling on the wall
or
- on the wall if the lateral duct is
lower.
Push the lateral duct under the
flat side of the bracket and press
it over the protruding bracket
(Fig. 20).
Note: Note:
Note: Note: Note:
The brackets must always be placed
in the same positions.
The methods of securing the lateral
duct and the lateral ducts
themselves differ depending on the
country in which they are installed.
Your responsible after-sales service
will be pleased to advise you in the
event of unclarity.