Sony DSC-RX10M4 Service Manual page 75
Hide thumbs
Also See for DSC-RX10M4:
- Instruction manual (41 pages) ,
- Help manual (594 pages) ,
- Service manual (78 pages)
Table of Contents
Advertisement
6.
Remove the Gear Assy Block Assy.
7.
Remove the six screws, Inner/Outer Eccentric Bearing and pull out the two Flexible Boards from the hole of the
Rear Tube Mirror Block Assy.
Note
When installing the Inner/Outer Eccentric Bearing, install it at an original phase angle (within ±5°).
Put a mark on the Inner/Outer Eccentric Bearing to install it in the original phase angle.
8.
Remove the Cam Tube Retainer (1850).
Inner/Outer Eccentric Bearing
Flexible Board
DSC-RX10M4
Z Retainer
Gear Assy Block Assy
Rear Tube Mirror Block Assy
Ribs
Hooks
Ribs
Cam Tube Retainer (1850)
Rib
Rib
4-27
Advertisement
Table of Contents
