Sony DSC-RX10M4 Service Manual page 79

2. Insert the white piece of 4 Group Frame Block Assy to the groove of Straight Tube (1850).
Note
Hold the 4 Group Frame Block Assy so that it does not turn.
3. Turn the Cam Tube (1850) fully counterclockwise and turn it clockwise to install the 4 Group Frame Block
Assy.
4. Place the Flexible Board in the concave of the Straight Tube (1850).
White
Piece
Groove
5. Insert the edge of Flexible Board of the 4 Group Frame Block Assy to the hole of Straight Tube (1850).
Hole
Flexible Board
6. Align the circle (○) mark of the Cam Tube (1850) and triangle (△) mark of the Straight Tube (1850).
7. Align the triangle (△) mark of the 3 Group Frame Block Assy and triangle (△) mark of the Straight Tube (1850).
Insert the projection of 3 Group Frame Block Assy to the groove of Straight Tube (1850). At the same time, pass
the Flexible Board of the 3 Group Frame Block Assy through the Cam Tube (1850).
8. Turn the Cam Tube (1850) fully counterclockwise and turn it clockwise to install the 3 Group Frame Block
Assy.
DSC-RX10M4
4 Group Frame Block Assy
Straight Tube (1850)
(Inner)
1
Straight Tube (1850)
(Inner)
Flexible Board
Cam Tube (1850)
(Outer)
2
Rib
Rib
4-31