Lens Block; Ornamental Ring A Or Barrier Assy Replacing Method - Sony DSC-HX90 Service Manual

4-3.

Lens Block

4-3-1.

Ornamental Ring A or Barrier Assy Replacing Method

Removal
1. Turn on the power switch and extend the lens (TELE end).
2. Detach the battery.
3. Pour a solvent such as alcohol to two gaps of the Ornamental Ring A with tweezers or a fine-tipped stick as shown
below.
4. Heat the Ornamental Ring A with a drier.
5. Turn the Ornamental Ring A clockwise and counterclockwise to detach it.
Gaps
Solvent
6. Disengage the four claws and remove the Barrier Assy.
Barrier Assy
Claws
Installation
1. Fit the four claws and attach the Barrier Assy.
Barrier Assy
2. Attach two Barrier Tapes so that the end of each tape comes to the dent.
Note
Attach Barrier Tapes carefully so that they do not wrinkle.
DSC-HX90/DSC-HX90V
Tweezers
Drier
Claws
Ornamental Ring A
Barrier Assy
Claws
Claws
4-24