Sony DSC-RX10M4 Service Manual page 83

19. Install the 2 Group Plate (1850).
20. Turn the Cam Tube (1850) counterclockwise. Install the Cam Tube Retainer (1850).
21. Pass the two Flexible Boards through the hole of the Rear Tube Mirror Block Assy. Align the Guide Shaft with
the hole of Inner/Outer Eccentric Bearing. Install the Rear Tube Mirror Block Assy with six screws.
Cam Tube Retainer (1850)
Hole
Be careful the
direction of the Plate.
Hole
22. Install the Gear Assy Block Assy.
DSC-RX10M4
2 Group Plate (1850)
Cam Tube (1850)
Inner/Outer Eccentric Bearing
Lower surface
Positioning Pins
Cam Tube (1850)
Hole
Hole
Positioning Pin
Rear Tube Mirror
Block Assy
Flexible Boards
4-35