Subscribe to Our Youtube Channel
Related Manuals for MUNBYN ITPP129S
Summary of Contents for MUNBYN ITPP129S
- Page 1 ITPP129S MUNBYN Thermal Label Printer USER MANUAL More Choice For Your Growing Business Version: 1.1.1...
-
Page 2: Table Of Contents
Contents Product Introduction 1.1 What’s in the box? 01 Product Introduction 1.1 What’s in the box 1.2 Printer features 02 Set Up The Printer 2.1 Printer Quick Connect 2.2 Paper Setup 03 Device Connection 3.1. Connect to Phone 3.2. Connect to Windows 3.3. -
Page 3: Set Up The Printer
1.2 Product features Set Up The Printer 2.1 Printer Quick Connect... -
Page 4: Paper Setup
2.2.Paper Setup Device Connection 3.1.Connect to Phone Scan the QR code to download the app. Click on the device to connect, select the Wi-Fi connected to the current mobile phone and enter the Wi-Fi password Automatic label identification: Load no less than 4 consecutive labels into the printer. After the paper is stable, press and hold feeder button, until you hear a beep. - Page 5 Click on the device to view details and then print a self-test page After the Wi-Fi connection is successful, return to the device connection interface, it will display that the printer is connected...
-
Page 6: Connect To Windows
Enter the printer Wi-Fi IP, select Next, and follow the driver installation until finished. Open the Windows printer driver, select the WIFI Windows driver download link: munbyn.biz/129swind Note: The PC-connected network must be the same as the printer Before printing, check whether the printer's Wi-Fi IP matches the IP in the PC. -
Page 7: Connect To Mac
Install the printer driver and follow the driver installation until finished.Mac driver download link: munbyn.biz/129smacd Select IP and enter the printer Wi-Fi IP in the Address. Then select HP Jetdirect - Socket protocol and select Munbyn-ITPP129S-Wi-Fi in Use of Printer Software. -
Page 8: Feeder Button Instruction
Feeder Button instruction Desired action Execution Skip a label When the printer is standby and ready (not in the middle of printing), press the Feed Button once. Restore factory setting Insert the label, ensure it is straight and smooth. When the printer is standby and ready, press and hold the Feed Button while the blue light flashes 4 times, then release the... -
Page 9: Led Status
PRO Tips Pause printing When the printer pauses printing, press the Feed Button once When you change other size label，run the automatic label identification Resume printing When the printer pauses printing, Press the circle feeder button on the printer to ship a blank label press the Feed Button once to To run a self-test: press and hold the feeder button until the blue light flash resume printing. -
Page 10: Safety Notices
This equipment has been tested and found to comply with the limits for a If you encounter any issues with the product, please contact the MUNBYN Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are team to promptly receive troubleshooting tips or a replacement.
Need help?
Do you have a question about the ITPP129S and is the answer not in the manual?
Questions and answers