MUNBYN ITPP130 - Shipping Label Printer Manual

Table of Contents

Contents

1 Product Introduction
- 1.1 What's in the package?
2 Printer Overview
3 Set Up The Printer
4 Pro Tips
5 FAQ
6 LED Status
7 Feeder Button Instruction
8 Specification
9 Safety Notices
10 Tech Support
11 Documents / Resources
- 11.1 References
- 11.2 Download manual

Product Introduction

What's in the package?

Printer
USB Cable
User Manual
USB Flash Driver
Power Adapter
Quick Tips
Power Cord
Labels

If contents are missing or damaged, please contact us.

Printer Overview

Set Up The Printer

Recommended:
Watch the short setup video at: www.bit.ly/unboxing130

Quick printer connection

Please follow the sequence of the above picture to operate.

Label setup

Automatic label identification:

Load no less than 4 consecutive labels into the printer.
After the paper is stable, press and hold feeder button, until you hear a beep.
Then, the printer will automatically label identification.

Driver installation

For the latest driver, please visit: www.bit.ly/driver130

Please run the downloaded software from the web address indicated above and follow the prompts to complete installation.

Windows Driver Installation

Mac Driver Installation

Pro Tips

Anytime you change your label, run the automatic label identification.
Press the feeder button on the printer to skip a blank label.
To run a self-test, press and hold the feeder button until you hear two short beeps.
To ensure your printing quality, please use MUNBYN labels. If you use other brands' label paper, please run "automatic label identification" before printing.
Regularly clean the printer head.
If the paper is jammed and the red light flashes, run Automatic label identification.
Insert Munbyn into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating system.

FAQ

FAQ file, please visit: www.bit.ly/130faq

LED Status

Light	Description	Troubleshoot
Blue	Normal operation	/
Flashing Red (every 2 seconds)	Label paper is not identified	Run automatic label identification
Flashing Red (every 1 second)	Cover is not closed	Check that the cover is completely closed
Flashing Blue and Red	Printer head is overheated	Printer will automatically resume once the printer head has cooled down

Feeder Button Instruction

Printer status	Feeder button	Function
Printing	Press the button	Pause printing
Standby	Press and hold on until you hear one beep	Automatic label identification
Standby	Press and hold on until you hear five beeps	Reset Printer

Specification

Method	Direct Thermal
Resolution	203 dpi
Max Printing Speed	150 mm/s
Paper Width	40-110 mm (1.57-4.3inches)
Paper Thickness	0.06-0.25 mm
Power Adapter	24V / 2.5A
Printing Life	TPH 100Km
Operating Environment	Temperature: 0 to 45°C Humidity: 10-90% (non condensing)
Storage Environment	Temperature: -10 to 50°C Humidity: 10-80% (non condensing)
Connection	USB
Weight	1.76 lbs/0.8kg
Dimensions	182x99x87mm(LWH)

Safety Notices

The printer head can become very hot after printing labels. Do not touch the printer head.
Do not bend the power cord excessively or place objects on the cord.
Do not use the printer if you find any irregularities as these could result in fire or electrocution.
Keep the printer out of reach of children.
Use only approved accessories and do not try to disassemble, repair the unit by yourself.
Keep the printer away from water and other objects that could penetrate the components.
Please unplug the printer when it is not in use for long periods.

Tech Support

WhatsApp

+8617817881067

FB message

Munbynofficial

E-mail: support@munbyn.com
Whatsapp: +8617817881067
Phone: +1 403 477 1911
Skype: munbyn
Support time: Monday to Friday 24 hours.

MUNBYN provides 18 months warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement.

Website: www.munbyn.com
(how-to videos, warranty details)