Connecting The Hose To The Water Tap; Connecting The Hose To The Appliance - LG F6V910RTSA Owner's Manual

global_main.book.book Page 72 Sunday, October 16, 2022 3:39 PM
Connecting the Water Supply Hose
Connecting the Hose to the
Water Tap
Connecting Screw-Type Hose to Tap
with Thread
Screw the supply hose connector onto
the water supply tap. Hand tighten only
with the aid of a soft cloth. Do not
overtighten the supply hose with any
mechanical device.
NOTE
• After connecting the water inlet hose
to the water tap, turn on the water tap
to flush out foreign substances (dirt,
sand, sawdust, and etc.) in the water
lines. Let the water drain into a bucket,
and check the water temperature.
72
Connecting the Hose to the
Appliance
Screw the supply hose to the water inlet
valve on the back of the appliance.
NOTE
• After completing connection, if water
leaks from the hose, repeat the same
steps. Use the most conventional type
of tap for the water supply. In case that
the tap is square or too big, remove
the guide plate before inserting the
tap into the adaptor.
• Make sure that the hose should not be
kinked or trapped.