Unpacking The Appliance; Lifting The Appliance Off The Foam Base; Removing The Transit Bolt Assemblies - LG F6V910RTSA Owner's Manual

global_main.book.book Page 66 Sunday, October 16, 2022 3:39 PM

Unpacking the Appliance

Lifting the Appliance Off
Unpacking the Appliance
the Foam Base
After removing the carton and shipping
material, lift the appliance off the foam
base.
• Make sure the tub support
off with the base and is not stuck to the
bottom of the appliance.
• If you must lay the appliance down to
remove the carton base
protect the side of the appliance and
lay it carefully on its side. Do not lay the
appliance on its front or back.
* This feature may vary depending on
the model purchased.
66
Removing the Transit Bolt
Assemblies
To prevent the appliance from severe
vibration and breakage, remove transit
bolts and retainers.
1
* comes Starting with the bottom two transit
A
bolts
fully loosen all transit bolts by turning
them counterclockwise.
, always
B
2
Remove the bolt assemblies by
wiggling them slightly while pulling
them out.
3
Install the hole caps.
, use the spanner (included) to
A