Control Panel - LEITZ TruSens Z-6000 Owner's Manual

CONTROL PANEL

SensorPod™ Signal Indicator
Power Button
Fan Speed Settings
Select fan speed or AUTO mode. In AUTO mode,
purifier automatically adjusts fan speed based on air
quality readings from SensorPod.
(AUTO mode only available when purifier is paired with SensorPod
and receiving signal)
12
Dimmer Mode
Display illumination turns off without sacrificing the
effectiveness of the purifier. Simply press the button
again to bring back all display features.
Filter Indicator Reset
HEPA and Carbon indicators glow red when it is time
to replace the filters. Simply hold Filter Reset button
for 3 seconds to reset the indicators. If replacing the
filter before HEPA and Carbon indicators turn red,
hold Filter Reset button for 10 seconds to reset the
indicators.
(See pages 16-18 for replacement instructions. Follow above Reset
button instructions after replacing filter.)
UV Mode
UV-C within the purifier's filter chamber are on when
the symbol is on.
Timer Mode
Purifier will automatically turn off after 2, 4, 8, or 12
hours. To cancel this countdown, simply press button
until no timer setting is displayed.