Control Panel; Filter Replacement - LEITZ TruSens Z-1000 Quick Start Manual

IMPORTANT: Before operation of the purifier, follow the steps and
read our TruSens Owners Guide at: www.leitz.com/trusens
Set up
Fig. 1)
Unscrew bottom cover and remove plastic bag from
filter
Fig. 2)
Secure filter on bottom cover and replace inside the
purifier

Control panel

Fig. 4)
Power on/off
Fan speed 1/2/Turbo
UV mode on/off
Carbon/HEPA/UV replacements

Filter Replacement

Fig. 5)
Filter type
A. Carbon filter
B. HEPA Drum Filter
C. UV Bulb
#
*Replacements indicator will glow red on control panel to notify you to change.
See Fig. 6) Use caution when using a screwdriver to remove the UV housing when replacing the UV-C emitter.
#
Suggested Replacement / Cleaning
Every 3-4 months*
Every 12-15 months*
Every 2-3 years*
Fig. 3)
Plug-in your purifier and power on
Place unit on a flat surface, away from obstructions
Room coverage up to 23 m²
Item Number
2415103 (3-pack)
2415104 (includes A & B)
2415105
EN
Page 5