Operation - Bosch Rexroth ROTATRAC eGFT 8000 10 Series Manual

9 Operation

The planetary gearbox is a subassembly that does not require any settings or
changes in operation. The chapter of these operating instructions does therefore not
include any information on setting possibilities. Only use the planetary gearbox
within the performance range described in the technical data. The machine/vehicle
manufacturer is responsible for the correct configuration or connection of the
electrical control, wiring and circulating oil lubrication.
Danger of property damage and personal injury!
The static multiple-disk parking brake (parking brake) of the planetary gearbox is a
safety device. If the pressure liquid for the static multiple-disk parking brake is
contaminated, the static multiple-disk parking brake and thus the planetary gearbox
can block in undefined position. This way, the stopping function of the static
multiple-disk parking brake is no longer warranted!
Switch off electric motor when the planetary gearbox is blocked.

Avoid contamination caused by unclean pressure fluids, rubbed-off parts or

residual dirt from system components.
Ensure proper installation of an emergency stop function, so that the consumer

driven machine can be brought into a safe situation.
The service life of the ROTATRAC eGFT 8000 planetary gearbox depends on the
proper assembly, installation, commissioning and application conditions, such as
for following factors, for example: speed, torque, duty cycle, operating conditions
and temperatures.
RE 79088-01-B/02.2019, ROTATRAC eGFT 8000 general operating instructions series 10, Bosch Rexroth AG
CAUTION
Operation 43/64